Holes for bolts
In plates, brackets, feet. For M12, M16, M20 and larger — on the pillar drill up to Ø 40 mm.
Services
Drilling holes in steel
Pillar drill up to Ø 40 mm, magnetic and handheld — depending on the part. Bring the piece or a drawing, from a single piece. Przełęk near Nysa.
Scope
What we drill most often
From a hole in a bracket to holes in a beam — private customers and companies.
Pipe and posts
Fences, gates, handrails. A hole in the tube, not “by feel” on site.
Beams and large frames
Too big for the pillar table. The magnetic drill sits on the work in the hall — beam, frame, thick plate.
Opening up a hole
Too small from laser or earlier work — we ream it out to the diameter you need.
Spacing from a drawing
Several holes in one part, axes as on the documentation. Not “more or less”.
A single piece
No series required. Bring one bracket or a short run for welding.
Not one machine. Pillar drill — a true, perpendicular hole, up to Ø 40 mm, when the part fits on the table. Magnetic — a beam, a welded frame or a thick plate that will not go under the pillar: the drill goes to the work. Handheld — smaller holes and places where pillar and magnet will not fit.
We drill plate, pipe, profiles and angles: holes for bolts, for pins, and opening up what is already there. Your material or ours, one piece or a short run.
Plant in Przełęk near Nysa. Bring the part or give diameter, thickness and whether it is a bracket or a whole frame — we will pick the drill.
What we drill with
Ø 40 mm
pillar drill
magnetic
on a beam or large frame
handheld
small holes and tight spots
1 pc
from a single part
Have order documentation
or a service to carry out?
Send us drawings or a short description — we will reply with a quote within 48 hours.